JCC a Leviton Company JC180024/DALI
Image is for illustrative purposes only
Previous
Next
JCC a Leviton Company JC180024/DALI
JCC a Leviton Company JC180024/DALI
JCC a Leviton Company JC180024/DALI
JCC a Leviton Company JC180024/DALI
JCC a Leviton Company JC180024/DALI
JCC a Leviton Company JC180024/DALI
JCC a Leviton Company JC180024/DALI
JCC a Leviton Company JC180024/DALI
JCC a Leviton Company JC180024/DALI
JCC a Leviton Company JC180024/DALI
JCC a Leviton Company JC180024/DALI

JCC JC180024/DALI ToughLED™ Pro 1200mm 4ft Twin 42W IP65 4000K DALI EM FR

Part: JC180024/DALI
Need this part urgently: we advise you to check the stock availability for this item by contacting our sales team on 01482 589015
Description
Downloads

Our new ToughLED™ Pro range is the culmination of feedback from over one hundred Electrical Contractor interviews, focus sessions and install days. We watched, listened and learnt to gain an understanding of the key areas that hampered Electrical Contractors when installing traditional Weatherproof fixtures. Our Design and Development team then took this information as the brief to re-imagine all aspects of the Weatherproof range, from wiring access, IP maintenance, side clip mechanisms to simple points such as laser level and internal drilling guides. Through retention of the best elements of our previous Weatherproof range and addition of new innovative installation solutions, we have created ToughLED™ Pro. The easiest and most thought through Weatherproof design on the market.

  • High efficiency up to 145 lpcW
  • 90º Lock-in-place side clip design, keeps clips clear during installation
  • Detachable 4 pin terminal block with multiple positions adjacent to all cable entry points
  • Inbuilt loop-in/loop-out cable restraints to ensure that cables do not clash when closing the fixture
  • Plug & play emergency & microwave sensor modules with optional remote control
  • Ultra-wide surface mount bracket rail to enable flexibility to locate joists
  • Wide body for retrofitting BESA conduit box mounting, with rear, side and end conduit entry points
  • Unique rear IP65 gasket, sealing cable entry from within the fixture for surface mounting applications
  • 4ft, 5ft, 6ft single and twin light outputs in both opal and prismatic diffuser options, Microwave step dimmable, DALI and 1-10V dimmable options available
  • 5-year extended warranty on fixture and batteries, which uses LifePO4 batteries for improved performance and life

Mounting method :Wall surface mounted / ceiling surface mounting
Protection class :I
Width :96mm
Function :Escape route lighting
Connection type :Other
Housing colour :Grey
Voltage type :AC
Power supply system :Peripheral (individual battery)
Control gear :LED driver constant current
Number of poles :4
Length :1270mm
Height/depth :81.3mm
Housing material :Plastic
Light source type :LED replaceable
Cover material :Plastic transparent
Impact resistance (IK rating) :IK08
Battery chemistry :Lithium-ions
Nominal voltage :220 to 240V
Degree of protection (IP rating) :IP65
Lamp included :Yes
With remote switch connection :No
Monitoring equipment :Other
Maximum system power :38W
Rated luminous flux acc. IEC 62722-2-1 :5400Lm
Constant luminous flux control :Yes
Type of cabling :Suitable for through wiring
Rated ambient temperature acc. IEC62722-2-1 :-20 to 50°C
Light distribution :Diffuser
Nominal operation time :0 to 3 Hour
Replaceable control gear :Yes
Power factor :0.98

Make an enquiry

...